Incorporation of acridine orange and methylene blue in Langmuir monolayers mimicking releasing nanostructures.

The efficiency of methylene blue (MB) and acridine orange (AO) for photodynamic therapy (PDT) is increased if encapsulated in liposomes. In this paper we determine the molecular-level interactions between MB or AO and mixed monolayers of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-dipalmitoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DPPG) and cholesterol (CHOL) using surface pressure isotherms and polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS). To increase liposome stability, the effects from adding the surfactants Span® 80 and sodium cholate were also studied. Both MB and AO induce an expansion in the mixed monolayer, but this expansion is less significant in the presence of either Span® 80 or sodium cholate. The action of AO and MB occurred via coupling with phosphate groups of DPPC or DPPG. However, the levels of chain ordering and hydration of carbonyl and phosphate in headgroups depended on the photosensitizer and on the presence of Span® 80 or sodium cholate. From the PM-IRRAS spectra, we inferred that incorporation of MB and AO increased hydration of the monolayer headgroup, except for the case of the monolayer containing sodium cholate. This variability in behaviour offers an opportunity to tune the incorporation of AO and MB into liposomes which could be exploited in the release necessary for PDT.

Microbial nanocellulose adherent to human skin used in electrochemical sensors to detect metal ions and biomarkers in sweat.

The pursuit of biocompatible, breathable and skin-conformable wearable sensors has predominantly focused on synthetic stretchable hydrophobic polymers. Microbial nanocellulose (MNC) is an exceptional skin-substitute natural polymer routinely used for wound dressing and offers unprecedented potential as substrate for wearable sensors. A versatile strategy for engineering wearable sensing platforms is reported, with sensing units made of screen-printed carbon electrodes (SPCEs) on MNC. As-prepared SPCEs were used to detect the toxic metals cadmium (Cd2+) and lead (Pb2+) with limits of detection of 1.01 and 0.43 µM, respectively, which are sufficient to detect these metal ions in human sweat and urine. SPCEs functionalized through anodic pre-treatments were used for detecting uric acid and 17ß-estradiol in artificial sweat, with detection limits of 1.8 µM and 0.58 µM, respectively. The electrochemical treatment created oxygen groups on the carbon surfaces, thus improving wettability and hydrophilicity. MNC was herein exploited as an adhesive-free, yet highly skin-adherent platform for wearable sensing devices that also benefit from the semi-permeable, non-allergenic, and renewable features that make MNC unique within the pool of materials that have been used for such a purpose. Our findings have clear implications for the developments on greener and more biocompatible but still efficient substrates and may pave the route for combining immunosensing devices with drug delivery therapies.

Fully-printed electrochemical sensors made with flexible screen-printed electrodes modified by roll-to-roll slot-die coating.

The manufacture of sensors using large-scale production techniques, such as roll-to-roll (R2R) processing, may fulfill requirements of low-cost disposable devices. Herein, we report the fabrication of fully-printed electrochemical sensors using screen-printed carbon electrodes coated with carbon black inks through slot-die coating within an R2R process. As a proof of concept, sensors were produced to detect the neurotransmitter dopamine with high reproducibility and low limit of detection (0.09 µmol L-1). Furthermore, fully-printed biosensors made with a tyrosinase-containing ink were used to detect catechol in natural water samples. Since slot-die deposition enables printing enzymes without significant activity loss, the biosensors exhibited high stability over a period of several weeks. Even more important, R2R slot-die coating may be extended to any type of sensors and biosensors with the possibility of large-scale manufacturing.

Influence of Alkyl Chains of Modified Polysuccinimide-Based Polycationic Polymers on Polyplex Formation and Transfection.

The development of polymers with low toxicity and efficient gene delivery remains a significant barrier of nonviral gene therapy. Modification and tuning of chemical structures of carriers is an attractive strategy for efficient nucleic acid delivery. Here, polyplexes consisting of plasmid DNA (pDNA) and dodecylated or non-dodecylated polysuccinimide (PSI)-based polycations are designed, and their transfection ability into HeLa cells is investigated by green fluorescent protein (GFP) expressing cells quantification. All cationic polymers show lower cytotoxicity than those of branched polyethyleneimine (bPEI). PSI and bPEI-based polyplexes have comparable physicochemical properties such as size and charge. Interestingly, a strong interaction between dodecylated polycations and pDNA caused by the hydrophobic moiety is observed in dodecylated PSI derivatives. Moreover, the decrease of GFP expression is associated with lower dissociation of pDNA from polyplexes according to the heparin displacement assay. Besides, a hydrophobization of PSI cationic derivatives with dodecyl side chains can modulate the integrity of polyplexes by hydrophobic interactions, increasing the binding between the polymer and the DNA. These results provide useful information for designing polyplexes with lower toxicity and greater stability and transfection performance.

Understanding the interactions of imidazolium-based ionic liquids with cell membrane models.

Cell membrane models have been used to evaluate the interactions of various imidazolium-based ionic liquids (ILs) with Langmuir monolayers of two types of phospholipids and cholesterol. Data from surface pressure isotherms, Brewster angle microscopy (BAM) and polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) pointed to significant effects on the monolayers of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and cholesterol, used to mimic the membranes of eukaryotic cells, for ILs containing more than 6 carbon atoms in the alkyl chain (i.e. n > 6). For ILs with less hydrophobic tails (n ≤ 6) and low concentrations, the effects were almost negligible, therefore, such ILs should not be toxic to eukaryotic cells. The hydrophobicity of the anion was also proved to be relevant, with larger impact from ILs containing tetrafluoroborate ([BF4]-) than chloride (Cl-). Molecular dynamics simulations for DPPC monolayers at the surface of aqueous solutions of alkylimidazolium chloride ([Cnmim]Cl) confirm the penetration of the IL cations with longer alkyl chains into the phospholid monolayer and provide information on their location and orientation within the monolayer. For monolayers of dipalmitoylphosphatidyl glycerol (DPPG), which is negatively charged like bacteria cell membranes, the ILs induced much larger effects. Similarly to the results for DPPC and cholesterol, effects increased with the number of carbon atoms in the alkyl chain and with a more hydrophobic anion [BF4]-. Overall, the approach used can provide relevant information of molecular-level interactions behind the toxicity mechanisms and support the design of (quantitative) structure-activity relationship models, which may help design more efficient and environmentally friendly ILs.

Molecular-level interactions of an azopolymer and poly(dodecylmethacrylate) in mixed Langmuir and Langmuir-Blodgett films for optical storage.

The applicability of azopolymers in optical storage can be extended through the use of nanostructured films produced with the Langmuir-Blodgett (LB) technique, but the film properties need to be optimized since these polymers generally do not form stable Langmuir films to be transferred onto solid substrates. Here, photoinduced birefringence was investigated for mixed Langmuir-Blodgett films from the homopolymers 4-[N-ethyl-N-(2-methacryloxyethyl)]-4'-nitroazobenzene (HPDR1-MA) and poly(dodecylmethacrylate) (HPDod-MA). The interactions between these polymers were studied in Langmuir and LB films. Surface pressure-area isotherms pointed to molecular-level interactions for proportions of 51 mf%, 41 mf% and 31 mf% of HPDR1-MA. Phase segregation was not apparent in the BAM images, in which the morphology of the blend film was clearly different from that of the Langmuir films of neat homopolymers. Through PM-IRRAS, we noted that the interaction between the azopolymer and HPDod-MA affected the orientation of carbonyl groups. Strong interactions for the mixture with 41 mf% of poly(dodecylmethacrylate) led to stable Langmuir films that were transferred onto solid supports as LB films. The photoinduced birefringence of 101-layer mixed LB films show features that make these films useful for optical storage, with the advantage of short writing times in comparison to other azopolymer films.

Detection of phenolic compounds using impedance spectroscopy measurements.

Langmuir-Blodgett (LB) and layer-by-layer films (LbL) of a PPV (p-phenylenevinylene) derivative, an azo compound and tetrasulfonated phthalocyanines were successfully employed as transducers in an "electronic tongue" system for detecting trace levels of phenolic compounds in water. The choice of the materials was based on their distinct electrical natures, which enabled the array to establish a fingerprint of very similar liquids. Impedance spectroscopy measurements were taken in the frequency range from 10 Hz to 1 MHz, with the data analysed with principal component analysis (PCA). The sensing units were obtained from five-layer LB films of (poly[(2-methoxy-5-n-hexyloxy)-p-phenylenevinylene]), OC(1)OC(18)-PPV (poly(2-methoxy,5-(n-octadecyl)-p-phenylenevinylene)), DR (HEMA-co-DR13MA (poly-(hydroxyethylmethacrylate-co-[4'-[[2-(methacryloyloxy)-ethyl]ethylamino]-2-chloro-4-nitroazobenzene]))) and five-bilayer LbL films of tetrasulfonated metallic phthalocyanines deposited onto gold interdigitated electrodes. The sensors were immersed into phenol, 2-chloro-4-methoxyphenol, 2-chlorophenol and 3-chlorophenol (isomers) solutions at 1 x 10(-9) mol L(-1), with control experiments carried out in ultra pure water. Samples could be distinguished if the principal component analysis (PCA) plots were made with capacitance values taken at 10(3) Hz, which is promising for detection of trace amounts of phenolic pollutants in natural water.

Light emitting diodes containing Langmuir-Blodgett films of copolymer of a poly(p-phenylene-vinylene) derivative and poly(octaneoxide).

The properties of Langmuir and Langmuir-Blodgett (LB) films from a block copolymer with polyethylene oxide and phenylene-vinylene moieties are reported. The LB films were successfully transferred onto several types of substrates, with sufficient quality to allow for evaporation of a metallic electrode on top of the LB films to produce polymer light emitting diodes (PLEDs). The photoluminescence and electroluminescence spectra of the LB film and device were similar, featuring an emission at ca. 475 nm, from which we could infer that the emission mechanisms are essentially the same as in poly(p-phenylene) derivatives. Analogously to other PLEDs the current versus voltage characteristics of the LB-based device could be explained with the Arkhipov model according to which charge transport occurs among localized sites. The implications for nanotechnology of the level of control that may be achieved with LB devices will also be discussed.

Study of the growth process of in situ polyaniline deposited films.

Polyaniline (PAni) thin films were deposited onto BK7 glass substrates using the in situ deposition technique. The control of the time and the aniline concentration in the PAni polymerization reaction on the film deposition allowed us to prepare films with different thickness, down to approximately 25 nm. The film growth process was monitored by measuring the UV-vis spectra and the AFM height profiles of the film surface. The curves of adsorption kinetics were analyzed with the Avrami's model, yielding an exponent n=3, thus indicating nucleation of spheroids at the initial stages of polymerization that grow through a diffusion process. AFM images of the surface height profiles corroborate this hypothesis, with spheroids growing with no preferred orientation during the in situ deposition.

Optical storage and surface-relief gratings in azobenzene-containing nanostructured films.

This paper brings an overview of photoisomerization-derived properties in azobenzene-containing nanostructured films produced with the Langmuir-Blodgett (LB) and layer-by-layer (LbL) methods. Emphasis was placed on the optical storage and formation of surface-relief gratings (SRGs), where the distinctive properties of the nanostructured films were highlighted. For optical storage, in particular, a discussion was made of the higher birefringence induced in LB films from azopolymers due to their organized nature, and of the strong effects from ionic interactions on the photoisomerization of azochromophores in LbL films. The molecular-level control of film properties in the LbL films is described as being responsible for the varied behavior observed in the photoinscription of SRGs, which may involve considerable level of photodegradation depending on the film fabrication conditions and materials used.

Morphology characterization of layer-by-layer films from PAH/MA-co-DR13: the role of film thickness.

We report on the use of dynamic scale theory and fractal analyses in the study of distinct growth stages of layer-by-layer (LBL) films of poly(allylamine hydrochloride) (PAH) and a side-chain-substituted azobenzene copolymer (Ma-co-DR13). The LBL films were adsorbed on glass substrates and characterized with atomic force microscopy with the Ma-co-DR13 at the top layer. The granular morphology exhibited by the films allowed the observation of the growth process inside and outside the grains. The growth outside the grains was found to follow the Kardar-Parisi-Zhang model, with fractal dimensions of ca. 2.6. One could expect that inside the grains the morphology would be close to a Euclidian surface with fractal dimension of ca. 2 for any growth stage. The latter, however, was observed only for thicker films containing more than 10 bilayers. For thinner films the morphology was well described by a self-affine fractal. Such dependence of the growth behavior with the film thickness is associated with a more complete coverage of adsorption sites in thicker films due to diffusion of polymer molecules.